.. _gconf_supported_devices:

Soporte de dispositivos en GConf
================================

.. csv-table:: GConf Compatibility Matrix
   :header: "Vendor", "Modelo", "Firmware/Version", "Backup", "Discover by SSH", "Disover by SNMP", "Push Config", "Push Firmware"
   :widths: 10 20 18 8 15 15 15 15

   "Cisco","ASR1001-X","16.09.02","✅","✅","❌","❌","❌"
   "Cisco","ASR1001-X","16.06.03","✅","✅","❌","❌","❌"
   "Cisco","ASR9K","6.2.2","✅","✅","❌","❌","❌"
   "Cisco","ASR920","16.09.04","✅","✅","✅","❌","❌"
   "Cisco","C1111-8PLTEEAWE","16.07.02","✅","✅","❌","❌","❌"
   "Cisco","C1111-8PLTEEAWE","16.09.08","✅","✅","❌","❌","❌"
   "Cisco","C881-K9","15.4(3)M3","✅","✅","❌","❌","❌"
   "Cisco","ISR4451-X/K9","16.03.03","✅","✅","❌","❌","❌"
   "Cisco","ISR4451-X/K9","16.06.05","✅","✅","❌","❌","❌"
   "Cisco","2600 series","12.4","✅","✅","✅","✅","✅"
   "Cisco","3700 series","12.4","✅","✅","✅","✅","✅"
   "DLink","3100","","✅","✅","❌","❌","❌"
   "Fortinet","FG-100E-BDL","7.0.12","✅","✅","❌","❌","❌"
   "Fortinet","FORTIGATE 200E","7.0.12","✅","✅","❌","❌","❌"
   "Huawei","NE40E-M2K-B","","✅","✅","❌","❌","❌"
   "Huawei","S5720-28TP-LI-AC","5.170","✅","✅","❌","❌","❌"
   "Huawei","AR3260","108","✅","✅","❌","❌","❌"
   "Huawei","NE20E-S2F","8.120","✅","✅","❌","❌","❌"
   "Huawei","AR6300","5.170","✅","✅","❌","❌","❌"
   "Huawei","AR1220W","5.170","✅","✅","❌","❌","❌"
   "Huawei","AR1220W","5.160","✅","✅","❌","❌","❌"
   "Huawei","AR651","5.170","✅","✅","❌","❌","❌"
   "Juniper","ex3300-24t","15.1R5-S3.4","✅","✅","❌","❌","❌"
   "Juniper","ex3300-24t","12.3R12-S10","✅","✅","❌","❌","❌"
   "Juniper","ex2200-24t-4g","12.3R9.4","✅","✅","❌","❌","❌"
   "Juniper","srx210b","10.4R8.5","✅","✅","❌","❌","❌"
   "Juniper","ex4200-24t","12.3R4.6","✅","✅","❌","❌","❌"
   "Juniper","srx240b","11.4R7.5","✅","✅","❌","❌","❌"
   "Teldat","iM8","11.01.02.60.01","✅","✅","✅","✅","❌"
   "Teldat","4Ge-router","11.01.03.60.02","✅","✅","❌","❌","❌"
   "Teldat","M1","11.01.01.20.02","✅","✅","❌","✅","✅"

Funciones compatibles
=====================

La siguiente tabla indica qué funciones de GConf se admiten por
dispositivo. He aquí un desglose de cada columna:

- **Backup**:
  GConf puede conectarse al dispositivo y descargar su configuración
  actual para propósitos de respaldo.

- **Discover by SSH**:
  El dispositivo puede ser descubierto usando el protocolo SSH. GConf
  se conecta vía SSH para recuperar la información necesaria.

- **Discover by SNMP**:
  El dispositivo puede ser descubierto usando el protocolo SNMP.
  GConf lo consulta usando peticiones SNMP estándar.

- **Push Config**:
  GConf soporta el envío de comandos de configuración directamente
  al dispositivo a través del protocolo apropiado (típicamente SSH o Telnet).

- **Push Firmware**:
  GConf soporta la carga y actualización de firmware en el
  dispositivo, si este lo permite (típicamente SSH o Telnet).