GConf Devices support list

GConf Compatibility Matrix

Vendor	Model	Firmware/Version	Backup	Discover by SSH	Discover by SNMP	Push Config	Push Firmware
Cisco	ASR1001-X	16.09.02	✅	✅	❌	❌	❌
Cisco	ASR1001-X	16.06.03	✅	✅	❌	❌	❌
Cisco	ASR9K	6.2.2	✅	✅	❌	❌	❌
Cisco	ASR920	16.09.04	✅	✅	✅	❌	❌
Cisco	C1111-8PLTEEAWE	16.07.02	✅	✅	❌	❌	❌
Cisco	C1111-8PLTEEAWE	16.09.08	✅	✅	❌	❌	❌
Cisco	C881-K9	15.4(3)M3	✅	✅	❌	❌	❌
Cisco	ISR4451-X/K9	16.03.03	✅	✅	❌	❌	❌
Cisco	ISR4451-X/K9	16.06.05	✅	✅	❌	❌	❌
Cisco	2600 series	12.4	✅	✅	✅	✅	✅
Cisco	3700 series	12.4	✅	✅	✅	✅	✅
DLink	3100		✅	✅	❌	❌	❌
Fortinet	FG-100E-BDL	7.0.12	✅	✅	❌	❌	❌
Fortinet	FORTIGATE 200E	7.0.12	✅	✅	❌	❌	❌
Huawei	NE40E-M2K-B		✅	✅	❌	❌	❌
Huawei	S5720-28TP-LI-AC	5.170	✅	✅	❌	❌	❌
Huawei	AR3260	108	✅	✅	❌	❌	❌
Huawei	NE20E-S2F	8.120	✅	✅	❌	❌	❌
Huawei	AR6300	5.170	✅	✅	❌	❌	❌
Huawei	AR1220W	5.170	✅	✅	❌	❌	❌
Huawei	AR1220W	5.160	✅	✅	❌	❌	❌
Huawei	AR651	5.170	✅	✅	❌	❌	❌
Juniper	ex3300-24t	15.1R5-S3.4	✅	✅	❌	❌	❌
Juniper	ex3300-24t	12.3R12-S10	✅	✅	❌	❌	❌
Juniper	ex2200-24t-4g	12.3R9.4	✅	✅	❌	❌	❌
Juniper	srx210b	10.4R8.5	✅	✅	❌	❌	❌
Juniper	ex4200-24t	12.3R4.6	✅	✅	❌	❌	❌
Juniper	srx240b	11.4R7.5	✅	✅	❌	❌	❌
Teldat	iM8	11.01.02.60.01	✅	✅	✅	✅	❌
Teldat	4Ge-router	11.01.03.60.02	✅	✅	❌	❌	❌
Teldat	M1	11.01.01.20.02	✅	✅	❌	✅	✅

Supported Capabilities

The following table indicates which GConf features are supported per device. Here’s a breakdown of each column:

• Backup: GConf can connect to the device and download its current configuration for backup purposes.

• Discover by SSH: The device can be discovered using SSH protocol. GConf connects via SSH to retrieve necessary information.

• Discover by SNMP: The device can be discovered using SNMP protocol. GConf queries it using standard SNMP requests.

• Push Config: GConf supports sending configuration commands directly to the device via the appropriate protocol (typically SSH or Telnet).

• Push Firmware: GConf supports uploading and upgrading firmware on the device, if the device allows this (typically SSH or Telnet).